HydroSeal sealed paver driveway

Professional Paver Sealing in Jacksonville, St. Johns County & Nearby Areas

WE BRING YOUR PAVERS BACK.

Cleaned. Resanded. Sealed. Built for Florida.

Professional paver sealing, driveway restoration, pool deck sealing, and travertine care across Nocatee, Ponte Vedra, Jacksonville, and St. Johns County.

Google
★★★★★

5-STAR RATED PAVER RESTORATION.

Homeowners hire HydroSeal when faded, dirty pavers need more than a quick pressure wash.

Read customer reviews →

TRIDENT MASTER CERTIFIED

DEEP CLEANING

Surface preparation before sealing.

JOINT SAND

ASTM C144 kiln-dried sand.

BREATHABLE SEALER

Two coats for Florida conditions.

2-YEAR WARRANTY

Covered workmanship & adhesion.

PROBLEM → SOLUTION

FROM FADED
AND WORN
TO CLEAN
PROTECTED
AND FINISHED.

THE PROBLEM

Sound familiar?

  • Pavers look faded, chalky, or uneven.
  • Joint sand is washing out.
  • Old sealer is cloudy or peeling.
  • You do not know who to trust.
THE HYDROSEAL ANSWER

We restore it correctly.

  • Deep cleaning prepares the surface.
  • Fresh sand rebuilds the joints.
  • Breathable sealer protects the finish.
  • Clear cure guidance removes guesswork.
HOW IT WORKS

Simple process. Serious preparation.

1

Send the project

Share the address, photos, approximate measurements, and the result you want.

2

Get a clear quote

We confirm scope, preparation, timing, and fixed project pricing.

3

Watch it come back

We clean, restore the joints, seal, and leave clear cure guidance.

REAL HYDROSEAL WORK

The difference is in the preparation.

Sealer cannot hide poor cleaning, wet pavers, contaminated joints, or failed coating underneath.

  • Professional deep cleaning
  • Stain treatment where practical
  • Joint-sand restoration
  • Two-coat sealer application
CUSTOMER PROOF

Trusted by Northeast Florida homeowners.

★★★★★

“HydroSeal made our paver driveway look brand new. The color came back to life, the joints were properly sanded, and the finish was smooth and professional.”

Scott M. · Google
★★★★★

“Outstanding results on our driveway, porch, and flower-bed pavers. Greg was professional, communicated clearly, and provided excellent customer service.”

Jane J. · Google
★★★★★

“They took their time, paid attention to every detail, and were thorough from start to finish. Our pavers look brand new and exceeded expectations.”

Sophia K. · Google

PAVER SEALING QUESTIONS, ANSWERED.

Do you offer free estimates for paver sealing?

Yes. We provide a free quote and inspection for paver sealing projects throughout Jacksonville, St. Johns County, and surrounding areas. We review the condition, square footage, and any repairs or extra preparation needed before giving a final price.

How much does paver sealing cost in St. Johns County and Jacksonville?

The cost of paver sealing in Florida varies based on square footage, paver porosity, surface and joint condition, access, staining, and preparation requirements. Proper prep and joint integrity are critical for long-term performance.

Our paver sealing pricing starts at $1.50/sq ft, using contractor-grade, premium Trident sealers—not homeowner or budget products. Final price depends on condition, prep, access, and joint stability.

Lower-priced offers often involve shortcuts such as poor cleaning, improper joint sanding, or diluted sealers, leading to premature wear or sealer failure.

As a rough two-car driveway range, a professionally sealed two-car driveway with an attached walkway typically falls in the $1,500–$2,200 range, depending on condition and prep requirements.

How long does paver sealing last in Florida?

With proper preparation and the use of professional-grade materials such as Trident sealers, most sealed paver surfaces in Florida typically last 3–4 years. Longevity depends heavily on how well the surface is cleaned, the condition and stability of the joint sand, moisture control before sealing, and correct application of the sealer.

Environmental and usage factors also play a major role. Areas with constant sun exposure, daily vehicle traffic, frequent irrigation, or poor drainage tend to experience faster wear than shaded or lightly used surfaces. Routine maintenance, such as gentle rinsing and avoiding harsh cleaners, can help extend the life and appearance of the sealed surface.

Can you clean and seal pavers the same day?

In many cases, yes. During spring and summer, same-day cleaning and sealing is often possible when weather, moisture levels, and surface conditions allow. If conditions aren’t ideal, we allow additional dry time to protect the final result.

Do you remove weeds and refill joint sand?

Yes. We remove existing weeds and failing joint material, then re-sand using Trident joint sand (ASTM-C144). Proper joint preparation and re-sanding are critical for stability, appearance, and long-term performance.

Will paver sealing make my surface slippery (especially pool decks)?

Sealing does not automatically make pavers slippery. For pool decks and walking areas, we adjust product selection and application method to prioritize traction and safety. Surface type, finish choice, and application technique all matter.

Do you fix sinking or loose pavers before sealing?

We inspect for sinking, rocking, or base issues and explain the correct fix if needed. Paver sealing protects the surface and joints, but it does not correct structural or base problems. We’ll always be upfront before sealing begins.

READY TO BRING IT BACK?

Tell us about your pavers.

Send the address, surface type, approximate size, and a few photos. We’ll help you determine the right restoration plan.

📞 Call💬 Text